Product data
Fit, Care & Limitations
Use the approved product, configuration and installation information for the specific component supplied.
Before installation
Check the controlled fit.
- Verify the correct component, nominal size, fit type and approved variant before installation.
- Fit only to clean, undamaged and suitable surfaces or interfaces.
- Do not force a component. Stop and re-check the approved fit if unusual resistance, distortion or misalignment occurs.
- Minor shade variation may occur between materials, production batches or surface finishes.
- Environmental and outdoor suitability depend on the approved product and material specification; do not assume universal suitability.
- Bespoke products are subject to approved dimensions, samples, drawings or agreed installation references.
- Follow any project-specific installation guide, sample approval or product data supplied with the order.
- Branding and colour availability depend on product geometry, available face area, material and production configuration.
| Check | Action |
|---|---|
| 1 | Confirm product code / approved description |
| 2 | Check fit against the intended interface |
| 3 | Check surface condition and cleanliness |
| 4 | Review any supplied project-specific guidance |
Complete the detail
Start a configuration
Show us the detail, the intended interface and the project requirement. We will review the information and confirm the next controlled step.